Unlocking - Directed Electronics AM2 Owner's Manual

note: Manually locking the vehicle does not arm the sys-
tem; it will only lock the doors.
The system can also be programmed to arm the optional Failsafe
Starter Kill automatically (called Passive Mode). If the system has
been programmed for Passive Mode, the Failsafe
automatically activate 30 seconds after the ignition has been
turned off. After the ignition has been turned off, the status LED
will flash rapidly to indicate that the system is in Passive Mode.
If Passive Mode has been programmed on, then it is also possible
to program the system for Passive Locking. With Passive Locking,
the vehicle doors lock automatically at the same time that the Failsafe
Starter Kill is activated. If Passive Locking is programmed on, care
must be taken to prevent the keys from being locked in the vehicle.
note: For Passive Mode to be effective, the Failsafe®
Starter Kill relay must be installed.

unlocking

Pressing for one second unlocks the system and the doors (if
connected). The horn will honk twice (if connected) and the
parking lights will flash twice to confirm unlocking of the system.
The optional Failsafe
LED will turn off, unless the system is programmed for Passive
Mode. In Passive Mode, the status LED will flash rapidly when the
system is unlocked. This indicates that the system will re-engage
the starter kill and re-lock the doors (if Passive Locking has been
© 2003 directed electronics, inc.
® Starter Kill will be deactivated. The status
®
® Starter Kill will
®
7