Table of Contents
Advertisement
ADA-91270-90340-100PFV v1.0
Chapter 7 Board Modification for MB96340 Series
7 Board Modification for MB96340 Series
For the MB9634x series an additional 10µF capacitor for the C pin is needed to be soldered
on the board. Please see the following photograph of the backside of the board for a
possible connection:
The positive pole of the capacitor is connected to the middle pin of jumper JP57. The
negative pole is connected to a ground pin of connector X14.
© Fujitsu Microelectronics Europe GmbH
- 17 -
UG-910012-16
Advertisement
Table of Contents
