Table of Contents
Advertisement
Screen
Use Arrow Keys to choose item
Use ENTER Key to change item
RESET Key Exits
MONOCASE/DualCase
To select MONOCASE or DualCase mode, highlight MONOCASE/DualCase and
press the Enter key to toggle between MONOCASE and DualCase. When MONOCASE
is selected, all characters are displayed on the screen as uppercase letters. When
DualCase is selected, all characters are displayed as both upper- and lowercase.
Mark Unprotected
When activated, the Mark Unprotected Field indicator displays a selectable symbol in
each unprotected field on the screen. This enables you to recognize locations where
keystrokes can be entered. To activate the Mark Unprotected Field indicator, highlight
Mark Unprotected and press the Enter key to select Yes or No (the default).
Mark Unprotected Field Character (MUP)
To select a Mark Unprotected Field symbol, highlight MUP Character and press the
Enter key to display one of the following symbols: dot ( . ), two dots ( .. ), underline ( _ ),
overscore ( ¯ ), or character outline box (
If Mark Unprotected (above) is set to No, your selection for MUP Character is ignored.
701344-003
Offline Menu Screen
Cursor
Keyboard
MONOCASE/DualCase
Mark Unprotected
MUP Character
MUP overstrikes
Row/Column
Screen Size
Partition
Reverse Video
Intensity Control
Figure 3-3. Offline Screen Menu
Setup Menus, Controls, and Indicators
Printer
Miscellaneous
DualCase
No
.
No
Off
24 X 80 (Mod 2)
On
On
Normal
). The default is dot ( . ).
Color
3-7
Advertisement
Table of Contents
