Precautions In Sales Promotion; Instruction Manual; Precautions On The Name Plate; Warning Label (A) - Hitachi C 10RA2 Technical And Service Manual

7. PRECAUTIONS IN SALES PROMOTION

In the interest of promoting the safest and most efficient use of the Model C 10RA2 Table Saw by all of our
customers, it is very important that at the time of sale, the salesperson carefully ensures that the buyer seriously
recognizes the importance of the contents of the Instruction Manual, and fully understands the meaning of the
precautions listed on the various caution plates attached to each machine.

7-1. Instruction Manual

Although every effort is made in each step of design, manufacture and inspection to provide protection against
safety hazards, the dangers inherent in the use of any electric tool cannot be completely eliminated. Accordingly,
general precautions and suggestions for the use of electric power tools, and specific precautions and suggestions
for the use of the table saw are listed in the Instruction Manual to enhance the safe and efficient use of the tool by
the customer. Salespersons must be thoroughly familiar with the contents of the Instruction Manual to be able to
offer appropriate guidance to the customer during sales promotion.

7-2. Precautions on the Name Plate

Each Model C 10RA2 is furnished with a Name Plate that lists the following precautions:
CAUTION
• For Safe operation, see Instruction Manual.
• Always wear eye protection.
• Do not use saw blade rated below 6000 rpm.
• Use guards with saw blade.
(1) Instruct the customer to read the Instruction Manual thoroughly prior to attempting to operate the machine.
(2) As cutting chips or sawdust flying into the eyes of the operator could result in loss of sight, it is absolutely
necessary to caution the customer to wear protective glasses whenever operating the machine.
(3) Instruct the customer never to use a saw blade with a rated maximum rotation speed of less than 6,000 /min.
If a saw blade with a rated maximum rotation speed of less than 6,000 /min is used, there is a danger that one
or more of the blade tips could fly off unexpectedly and cause serious injury to the operator or anyone else in
the immediate area.
(4) Instruct the customer to confirm without fail that all saw blade guards and other safety devices furnished with
the machine are properly mounted before attempting to operate the machine.

7-3. Warning Label (A)

F o r Y o u r O w n S a f e t y R e a d I n s t r u c t i o n
M a n u a l B e f o r e O p e r a t i n g T a b l e S a w
1 . W e a r e y e p r o t e c t i o n .
2 . U s e s a w b l a d e g u a r d a n d s p r e a d e r f o r e v e r y
o p e r a t i o n f o r w h i c h i t c a n b e u s e d , i n c l u d i n g a l l
t h r o u g h s a w i n g .
3 . K e e p h a n d s o u t o f t h e l i n e o f s a w b l a d e .
4 . U s e a p u s h s t i c k w h e n r e q u i r e d .
5 . P a y p a r t i c u l a r a t t e n t i o n t o i n s t r u c t i o n s o n
r e d u c i n g r i s k o f k i c k b a c k .
6 . D o n o t p e r f o r m a n y o p e r a t i o n f r e e h a n d .
7 . N e v e r r e a c h a r o u n d o r o v e r s a w b l a d e .
W A R N I N G
This is mounted on the right side of the body shell.
Please instruct users to strictly observe the
contents of 1 to 7 in the warning label shown at left.
(Warning Label (A) is not provided on some areas'
models.)
N 3 9 2 4 5 6
--- 6 ---
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
1
2
3
4