1. PRODUCT NAME
Hitachi Table Saw, Model C 10RA2
2. MARKETING OBJECTIVE
The Model C 10RA2 was developed to upgrade and replace the current Model C 10RA.
The key features of the Model C 10RA2 are as follows:
(1) Smooth-sliding fence mounted on rails at the front and the rear of the table
(2) One-touch fence setting, thanks to a quick lock fence system
(3) More stable guide of a workpiece with the 3-inch-heigh fence (C 10RA: 2-inch height)
The basic structure of the product is the same as that of the Model C 10RA.
3. APPLICATIONS
Rip-sawing and cross-cutting of ordinary wood, hardwood, plywood, composite wood materials, plastics and
similar materials.
4. SELLING POINTS
Wide table
(including the extension wing, which
is standard with this model)
Equipped with 2.6 hp
high-power motor
Good work efficiency
with electric brake
High cutting capacity with
255 mm (10") chip saw
Max. ripping width of:
360 mm (14-5/32") to the right of saw blade
400 mm (15-3/4") to the left of saw blade
--- 1 ---
Smooth-sliding fence
One-touch fence setting
Fence height: 3"