Temperature Led (Over Temperature) - Wolf DCL-200 FD User Manual

DCL-200 FD

Temperature LED (Over Temperature)

The over temperature alarm LED on the top alerts you when the projector LED light source becomes too hot or the peripheral is sultry.
Temperature LEDs
If the Red and Blue LED illuminates during operation, the LED will shut off and the cooling fans will continue to run for approximately
10 seconds. You should ensure that the airflow around the projector is sufficient, and ensure that the projector has proper ventilation.
When the over temperature LED lights up, a warning also appears on the screen.
The over temperature alarm LED on the top alerts you when the ambient temperature is too hot. If the LED blinks twice blue then
one red during operation, the LEDs will shut off and the cooling fans will continue to run for approximately 15 seconds. You
should ensure that the airflow around the projector is sufficient, and ensure that the projector has proper ventilation.
When the over temperature LED lights up, a warning also appears on the screen.
41