Automatic Power OFF Function
When an input signal is not detected or you don't
press any input button on the remote control for more
than 15 minutes, the projector will automatically turn
off if set to ON.
Auto Power OFF function will be disabled when it
is set to "OFF".
Note: When the Auto Power OFF function is set
to "ON", 5 minutes before the power turns
off, the message "Power OFF in 5 min."
will appear on the screen to indicate the
remaining minutes.
Input Search
Used to select the input source automatically when
there is no signal in the current input.
Selected Item
Input Search
Note: If you select Auto, the input source is
selected automatically.
Description
Manual
Auto
DCL-200 FD
33