Source Slect
Select TV/Projector and then MENU. Next select
INPUT to view available inputs and change source
selections.
Note: • Your projector many NOT offer all these inputs available in this screen. When the Wolf Cinema projector is configured
to operate with the ProScaler, only the single HDMI 1 input is used at the projector end. All other sources are selected
at the ProScaler.
• If you select Auto as the Input source, then the correct input source is automatically selected.
Factory Reset
This process will set all the items to Factory default
settings except Image Orientation.
Note: If you accidentally press the FACTORY RESET button and do not want to perform the factory reset function, press the
EXIT button or select NO to turn off the confirmation message.
DCL-200 FD
39