Air Cleaner - KYMCO DINK 125 Owner's Manual

AIR CLEANER

The air cleaner should be serviced at regular intervals.
Service more frequently when riding in unusually wet or
dusty areas.
Air cleaner element replacement
1. Remove the band (1).
2. Remove a bolt from the crankcase and six screws from
the air cleaner cover (2), then remove air cleaner
cover.
3. Remove six screws from the air cleaner element (3),
then remove and discard this air cleaner element.
4. The new air cleaner element installation is in the
reverse order of removal.
Use the KYMCO genuine air cleaner element or an
equivalent air cleaner element specified for your model.
Using the wrong KYMCO air cleaner element or a non-
KYMCO air cleaner element which is not of equivalent
quality may cause premature engine wear or
performance problems.
67
(1)
(2)
(3)