KYMCO DINK 125 Owner's Manual page 65

Hide thumbs Also See for DINK 125:
Table of Contents

Advertisement

Engine oil level check
Check the engine oil level each day before riding the scooter.
The level must be maintained between the upper (1) and lower level (2) marks on the oil filler
cap/dipstick.
1. Start the engine and let it idle for a few minutes.
2. Stop the engine and put the scooter on its center stand on level ground.
3. After a few minutes, remove the oil filler cap/dipstick, wipe it clean, and reinsert the oil filler
cap/dipstick without screwing it in. Remove the oil filler cap/dipstick. The oil level should be
between the upper and lower marks on the oil filler cap/dipstick.
4. If required, add the specified oil
upper level mark. Do not overfill.
5. Reinstall the oil filler cap/dipstick. Check for oil leaks.
NOTE:
!
Let the engine and exhaust system cool before working
in those areas.
(see page 58)
up to the
59
(1)
(2)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents