10.1 Notes for testing institutes
The correct determination of the declaration data is given with wash item
➤
after an intake phase of 5 complete drying programmes (Automatic
programme: Normal dry
Wash the base mesh filter in the base cassette after every drying
➤
programme.
The moisture sensor is calibrated based on average water hardness levels.
➤
To adjust the water conductivity value of the appliance according to the
norm (0.45 mmol/l), set the level of dryness to «4» in the user settings.
Set to standard programme according to AS/NZS 2442:
• Cotton, normal dry, 6 kg load capacity
Select automatic programme «normal dry» (press the
➤
the indicator light
10.2 Automatic energy-saving standby
The appliance is equipped with automatic stand-by to avoid consuming
energy unnecessarily.
The appliance door must be kept closed to obtain the lowest standby current
consumption.
All displays go out within minutes of a programme finishing. Energy
consumption is reduced to an absolute minimum. The safety functions,
however, remain activated.
).
for «normal dry» lights).
10 Technical data
button until
53