TOHATSU 9.9D Owner's Manual page 19

Attach the Cable clip to the cable outer groove to secure the
cable.
Re-install grommet B into the Motor cover lower. (Fig. IO)
. Shift side
Insert the Lock pin at the Shift lever fitting hole and turn it 90" to
lock it.
Attach the Cable outer groove to the Shift cable clip to secure it.
(Fig. IO)
Sleeve B Guide
Spring Pin
Fig. 12
Note:
Put the control lever on the Neutral position and the Neutral warm-up
lever in the fully closed position. (Fig. 21
Note:
Confirm whether the engine side shift is in gear when shifting the control lever
of the Remote Control Box to its first position in Forward or Reverse (about 32')
and whether the throttle of the carburetor is fully open when shifting the lever
further. (Fig. 2)
Confirm whether the carburetor's throttle is fully closed when the control lever
is shifted to the Neutral position. If it is not, adjust the position of the ball hold-
er. (Fig. 11)
12