Brother MFC-8510DN Basic User's Manual page 99

Error Message
No Toner
No Tray
Not Available
Out of Memory
Out of Memory
Secure Print Data
is full.
Cause
The toner cartridge or the drum
unit and toner cartridge
assembly is not installed
correctly.
The standard paper tray is not
installed or not installed
correctly.
The requested function is not
permitted to all User IDs by
Secure Function Lock 2.0.
The machine's memory is full.
The machine's memory is full.
Action
Remove the drum unit and toner cartridge
assembly, remove the toner cartridge from the
drum unit, and re-install the toner cartridge
back into the drum unit again. Re-install the
drum unit and toner cartridge assembly back in
the machine. If the problem continues, replace
the toner cartridge.
(See Replacing the toner cartridge
uu page 64.)
Re-install the standard paper tray.
Contact your administrator to check your
Secure Function Lock Settings.
Fax sending or copy operation in process
Do one of the following:
 Press Start to send or copy the scanned
pages.
 Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
 Clear the faxes from the memory.
Print the faxes that are stored in the
memory to restore the memory to 100%.
Then turn off Fax Storage to avoid storing
more faxes in the memory.
(uu Advanced User's Guide: Printing a fax
from the memory and Fax Storage)
 Add optional memory.
(uu Advanced User's Guide: Memory
board)
Print operation in process
Do one of the following:
 Reduce the print resolution.
(uu Software User's Guide: Printing (for
®
Windows ) or Printing and Faxing (for
Macintosh))
 Clear the faxes from the memory.
(See the above explanation.)
Press Stop/Exit and delete the previously
stored secure print data.
uu Software User's Guide: Secure Print Key
Troubleshooting
B
91