Search; Ldap Search; Fax Redial - Brother MFC-8510DN Basic User's Manual

Chapter 8

Search

You can search alphabetically for names you
have stored in the One Touch and Speed Dial
memories. (See Storing One Touch Dial
numbers uu page 43 and Storing Speed Dial
numbers uu page 45.)
a
Make sure you are in FAX mode
b
Press (Address Book).
c
Press the dial pad key for the first few
letters of the name. (Use the chart on
Entering text uu page 151 to help you
enter letters.)
Press OK.
d
Press a or b to scroll until you find the
name you are looking for.
Press OK.
e
Press Start.
Note
• If you do not enter a letter and press OK in
step c, all registered names will appear.
Press a or b to scroll until you find the
name you are looking for.
If you are using LDAP you must enter the
letters of your search in step c. (The
LDAP function is available as a
download.)
• If the LCD shows No Contact Found
when you enter the first few letters of the
name, it means that a name for the letter
is not stored.
40

LDAP search

8
If the machine is connected to your LDAP
server, you can search for information such
as fax numbers and E-mail addresses from
your server. (See How to set up LDAP
uu Network User's Guide)
(The LDAP function is available as a
.
download. Please download it from the
Brother Solutions Center at:
http://solutions.brother.com/.)

Fax redial

If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.
Redial/Pause only works if you dialled from
the control panel.
8
8