ZOTAC nanoRAID User Manual
Setting up the BIOS
1.
Setting your computer, then press <Delete> to enter BIOS SETUP UTILITY.
2.
Use the arrow key to select Advanced menu. When enter the Advanced menu,
select the Item "Storage Configuration".
Enter Storage Configuration > SATA Mode Selection, and select "RAID."
3.
4.
Enable the disks that you want to use as RAID disks.
5.
Press F10 to save the configuration and exit. The PC reboo
Note: The RAID is only available when two mSATA SSD modules are installed in
the ZOTAC nanoRAID adapter.
ZOTAC ZBOX nano
ts.
25