Getting To Know Your Zotac Zbox; Front View - Zotac ZBOX E Series User Manual

ZOTAC ZBOX

Getting to know your ZOTAC ZBOX

Front view

Refer to the diagram below to identify the components on this side of the system
1. Power switch
The power switch allows powering ON and OFF the system.
2. USB 3.1 port
The USB 3.1 port supports the SuperSpeed USB 3.1 devices and is backwards compatible
with USB 3.0/2.0/1.1 devices. Use this port for USB 3.1 devices for maximum performance
with USB 3.1 compatible devices.
3. Thunderbolt 4 port
The Thunderbolt 4 port is compatible with USB Type-C devices and provides a transfer rate of
up to 40 Gbit/s for Thunderbolt 4 devices, but does not support display output.
4. Memory card slot
The Memory card slot is compatible with SD/SDHC/SDXC cards used in devices like digital
cameras, MP3 players, mobile phones and PDAs.
5. Power LED
The Power LED is always ON when power is on.
6. WiFi LED
The WiFi LED is always ON when WiFi was active.
7. Hard disk LED
The hard disk LED blinks when data is being written into or read from the hard disk drive.
8. Microphone jack
The microphone jack is designed to connect the microphone used for video conferencing,
voice narrations or simple audio recordings.
9. Headphone/Audio Out jack
The stereo headphone jack (3.5mm) is used to connect the system's audio out signal to
amplified speakers or headphones.
6
1
2
4
8
3
5 6 7
9