Summary of Contents for Zotac ZBOX nano XS AD13 series
Page 2
ZOTAC. Products and corporate names mentioned in this manual may not be reg- istered trademarks or copyrights of their respective companies, and are used for identification purposes only.
Connecting a SPDIF cable ------------------------------------------------------------------ 15 Setting up the ZOTAC ZBOX nano XS ------------------------------------------------------ 16 Positioning the ZOTAC ZBOX nano XS ---------------------------------------------------- 17 Mounting the ZOTAC ZBOX nano XS to a LCD monitor ----------------------------- 17 IR receiver --------------------------------------------------------------------------------------- 18 Remote control (optional) -------------------------------------------------------------------- 19...
ZOTAC ZBOX nano XS Safety information Your ZOTAC ZBOX nano XS is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions.
ZOTAC ZBOX nano XS Welcome Congratulations on your purchase of the ZOTAC ZBOX nano XS mini-PC. The following illustration displays the package contents of your new ZOTAC ZBOX nano XS. Please contact your retailer If any of the below items are damaged or missed.
ZOTAC ZBOX nano XS Getting to know your ZOTAC ZBOX nano XS Front view Refer to the diagram below to identify the components on this side of the system 1. Power switch The power switch turns the mini-PC ON and OFF.
ZOTAC ZBOX nano XS Rear view Refer to the diagram below to identify the components on this side of the system. 1. Power input (DC19V) The supplied power adapter converts AC power to DC power for use with this jack.
ZOTAC ZBOX nano XS BIOS settings of specific functions ZOTAC ZBOX nano XS has some specific functions which can be enabled or disabled in BIOS settings, such as LED indicator, USB2.0 charge and CIR controller. How to disable the ring LED indicator Turn on the ZBOX nano mini-PC, then press <Delete>...
Page 10
ZOTAC ZBOX nano XS Press <Enter> to display the Onboard Device Control and navigate to Backlight Control. Press <Enter> and select Disabled. Press F10 to save the configuration and exit.
ZOTAC ZBOX nano XS How to enable USB2.0 charge (for S3/S4 status) In Advanced menu, select Onboard Device Config and press <Enter>. Use the arrow keys to enter the item Rear USB2.0 Charge hotplug(Top/ Bottom) / Front USB2.0 Charge hotplug, and select Enabled.
ZOTAC ZBOX nano XS How to disable CIR controller (for internal IR receiver) Use the arrow keys to navigate to Advanced > OnBoard Device Config > CIR Controller Configuration. Enter CIR Controller and select Disabled. Enabled: enable the internal IR receiver (default) Disabled: disable the internal IR receiver Press F10 to save the configuration and exit.
ZOTAC ZBOX nano XS Customizing the ZOTAC ZBOX nano XS Please follow the instructions below to remove the cover of the ZOTAC ZBOX nano XS before customizing. 1. Loosen the 4 screws securing the bottom cover into place. 2. Gently remove the cover.
ZOTAC ZBOX nano XS Installing a memory module 1. Locate the SO-DIMM memory slot and insert a SO-DIMM memory module into the slot at a 45 degree angle. 2. Gently press down on the memory module until it locks into place by the arms...
ZOTAC ZBOX nano XS Connecting a SPDIF cable 1. Connect the SPDIF cable to the headphone/SPDIF adapter correctly. 2. Locate the front panel and connect the headphone/SPDIF adapter to the headphone/SPDIF jack.
ZOTAC ZBOX nano XS Setting up the ZOTAC ZBOX nano XS Please connect the peripherals before using the ZOTAC ZBOX nano XS. 1. Turning on the system Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press the power switch on the front panel to turn on the system.
ZOTAC ZBOX nano XS Positioning the ZOTAC ZBOX nano XS • Do not cover or block the ventilation holes on ZOTAC ZBOX nano XS. To ensure proper operation and reliability, leave aproximately 4 inches (10 cm) of spacing in front of the ventilation holes.
ZOTAC ZBOX nano XS Connect the ZOTAC ZBOX nano XS to your LCD monitor with an HDMI cable. IR receiver Users can control the ZBOX nano XS by either IR receiver or external USB IR receiver. 1. IR receiver Note: Please install CIR driver from DVD before you use the IR receiver.
ZOTAC ZBOX nano XS Remote control (optional) ZOTAC ZBOX nano XS is shipped with a remote control. Follow the instructions below to use the remote control. Function keys Navigation Buttons Playback Buttons RECORD PAUSE STOP START BACK INFORMATION ...
ZOTAC ZBOX nano XS Lithium cell installation 1. Locate the arrow on the rear cover of the remote control, and push the cover as the arrow direction. 2. Remove the rear cover, and insert the CR2032 lithium cells into the battery jar at a 45 degree angle.
Installing system drivers Before you can use the full features of the ZOTAC ZBOX nano XS, the system drivers must be installed. The following types of operating systems are supported by the ZOTAC ZBOX nano XS driver DVD: •...
ZOTAC ZBOX nano XS Note: Each driver must be installed individually to ensure proper operation of the ZOTAC ZBOX nano Select the driver you want to install. The driver installer should launch. Follow the onscreen instructions for the selected driver to install.
Configuring audio output via an HDMI device Follow the steps below to enable audio output via HDMI when connecting the ZOTAC ZBOX nano XS to a TV or receiver via HDMI. Access the Sound settings via the system Control Panel.