Zotac ZBOX nano User Manual
Hide thumbs Also See for ZBOX nano:

Advertisement

Quick Links

ZOTAC ZBOX nano
ZOTAC ZBOX nano
User's Manual
No part of this manual, including the products and software described in it,
may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language in any form or by any means, except
documentation kept by the purchaser for backup purposes, without the
express written permission of ZOTAC.
Products and corporate names mentioned in this manual may not be reg-
istered trademarks or copyrights of their respective companies, and are
used for identification purposes only. All trademarks are the property of their
respective owners.
Every effort has been made to ensure that the contents of this manual are cor-
rect and up to date. However, the manufacturer makes no guarantee regard-
ing the accuracy of its contents, and reserves the right to make changes
without prior notice.
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type. Batteries
should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
1

Advertisement

Table of Contents
loading

Summary of Contents for Zotac ZBOX nano

  • Page 1 ZOTAC. Products and corporate names mentioned in this manual may not be reg- istered trademarks or copyrights of their respective companies, and are used for identification purposes only.
  • Page 2: Table Of Contents

    Connecting a SPDIF cable ------------------------------------------------------------------ 13 Setting up the ZOTAC ZBOX nano ---------------------------------------------------------- 14 Positioning the ZOTAC ZBOX nano --------------------------------------------------------- 16 Mounting the ZOTAC ZBOX nano to an LCD monitor -------------------------------- 16 Installing drivers and software --------------------------------------------------------------- 18 Installing an operating system -------------------------------------------------------------- 18...
  • Page 3: Product Specifications

    ZOTAC ZBOX nano Product specifications Processor • Intel Core i3-5010U Processor (dual core, 2.1 GHz) for ZBOX-MI522NANO series • Intel Core i5-5200U Processor (dual core, 2.2 GHz, up to 2.7 GHz) for ZBOX- MI542NANO series Onboard graphics • Intel HD Graphics 5500 •...
  • Page 4: Safety Information

    ZOTAC ZBOX nano Safety information Your ZOTAC ZBOX nano is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system Read and follow all instructions in the documentation before you operate your system.
  • Page 5: Welcome

    Welcome Congratulations on your purchase of the ZOTAC ZBOX nano mini-PC. The following illustration displays the package contents of your new ZOTAC ZBOX nano. Please contact your retailer If any of the below items are damaged or missed. Package contents •...
  • Page 6: Getting To Know Your Zotac Zbox Nano

    It also supports SPDIF output with the headphone/SPDIF adapter included in the package. The optical SPDIF output enables connecting the ZBOX nano to digital audio receivers and speakers for crystal clear digital audio and surround sound from compatible soundtracks.
  • Page 7: Rear View

    ZOTAC ZBOX nano Rear view Refer to the diagram below to identify the components on this side of the system. 1. Power input (DC19V) The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the mini-PC. To prevent damage to the mini-PC, always use the supplied power adapter.
  • Page 8: How To Disable The Ring Led Indicator

    ZOTAC ZBOX nano How to disable the ring LED indicator Turn on the ZBOX mini-PC and press <Delete> to enter the BIOS SETUP UTILITY. Use the arrow keys to navigate to the Power menu and select Logo Indicator. Press <Enter> and select Turn off.
  • Page 9: Customizing The Zotac Zbox Nano

    ZOTAC ZBOX nano Customizing the ZOTAC ZBOX nano Please follow the instructions below to remove the cover of the ZOTAC ZBOX nano before customizing. 1. Loosen the 4 screws securing the bottom cover into place. 2. Gently remove the cover.
  • Page 10: Installing A Memory Module

    ZOTAC ZBOX nano Installing a memory module 1. Locate the SO-DIMM memory slot and insert a SO-DIMM memory module into the slot at a 45 degree angle. 2. Gently press down on the memory module until it locks into place by the arms...
  • Page 11: Installing A Hard Disk

    ZOTAC ZBOX nano Installing a hard disk 1. Locate the hard disk bracket, remove the 2 screws, and remove the hard disk bracket as shown in the image below. 2. Install the hard disk bracket onto a 2.5-inch SATA hard disk with 2 screws.
  • Page 12 ZOTAC ZBOX nano 3. Insert the hard disk into the socket and gently slide into the connector. 4. Reinstall the screws for the hard disk bracket.
  • Page 13: Connecting A Spdif Cable

    ZOTAC ZBOX nano Connecting a SPDIF cable 1. Connect the SPDIF cable to the headphone/SPDIF adapter correctly. 2. Locate the front panel and connect the headphone/SPDIF adapter to the headphone/SPDIF jack.
  • Page 14: Setting Up The Zotac Zbox Nano

    ZOTAC ZBOX nano Setting up the ZOTAC ZBOX nano Please connect your peripherals before using your ZOTAC ZBOX nano. 1. Connecting to an HDMI display Connect one end of an HDMI cable to the HDMI port on the system rear panel and the other end to a HDMI-compatible display such as an HDTV or monitor.
  • Page 15 Connect USB devices like wired/wireless keyboards (varying with areas), mouse devices and printers to the USB ports on the system rear panel. Note: When your ZOTAC ZBOX nano is not in use, unplug the power adapter or switch off the AC outlet to conserve power.
  • Page 16: Positioning The Zotac Zbox Nano

    ZOTAC ZBOX nano Positioning the ZOTAC ZBOX nano • Do not cover or block the ventilation holes on ZOTAC ZBOX nano. To ensure proper operation and reliability, leave aproximately 4 inches (10 cm) of spacing in front of the ventilation holes.
  • Page 17 ZOTAC ZBOX nano Connect the ZOTAC ZBOX nano to your LCD monitor with an HDMI cable.
  • Page 18: Installing Drivers And Software

    Installing system drivers Before you can use the full features of the ZOTAC ZBOX nano, the system drivers must be installed. The following types of operating systems are supported by the ZOTAC ZBOX nano driver DVD and USB flash drive: •...
  • Page 19: Using Your Zotac Zbox Nano

    Select the driver you want to install. The driver installer should launch. Follow the onscreen instructions to install the drivers. Restart the system. Using your ZOTAC ZBOX nano Configuring wireless connection Please follow the instructions below to connect to a wireless network: Double-click the crossed wireless network icon (pic) in the notification area.
  • Page 20: Using A Dynamic Ip (Pppoe Connection)

    Note: Contact your internet Service Provider (ISP) if you have problems connecting to the network. Configuring audio output via an HDMI device Follow the steps below to enable audio output via HDMI when connecting the ZOTAC ZBOX nano to a TV or receiver via HDMI. Access the Sound settings via the system Control Panel.

Table of Contents