Summary of Contents for Zotac ZBOXNANO-ID61-PLUS-U
Page 1
Инструкция ZOTAC ZBOXNANO-ID61-PLUS-U Перейти в карточку товара 8 800 775 98 98...
Page 3
ZOTAC. Products and corporate names mentioned in this manual may not be reg- istered trademarks or copyrights of their respective companies, and are respective owners.
Installing a hard disk -------------------------------------------------------------------------- 14 Connecting a SPDIF cable ------------------------------------------------------------------ 15 ---------------------------------------------------------- 16 --------------------------------------------------------- 18 Mounting the ZOTAC ZBOX nano to a LCD monitor ---------------------------------- 18 IR receiver --------------------------------------------------------------------------------------- 19 Remote control (optional) -------------------------------------------------------------------- 20 Function keys ------------------------------------------------------------------------------- 20...
ZOTAC ZBOX nano Safety information Your ZOTAC ZBOX is designed and tested to meet the latest standards of safety for infor- the following safety instructions. Setting up your system Read and follow all instructions in the documentation before you operate your system.
ZOTAC ZBOX nano Welcome Congratulations on your purchase of the ZOTAC ZBOX nano mini-PC. The following illustration displays the package contents of your new ZOTAC ZBOX nano. Please contact your retailer If any of the below items are damaged or missed.
ZOTAC ZBOX nano Getting to know your ZOTAC ZBOX nano Front view Refer to the diagram below to identify the components on this side of the system The power switch turns the mini-PC ON and OFF. The HDD status indicator shows when the hard disk is transfering data.
ZOTAC ZBOX nano Rear view Refer to the diagram below to identify the components on this side of the system. The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the mini-PC. To prevent damage to the mini-PC, always use the supplied power adapter.
ZOTAC ZBOX nano BIOS settings, such as LED indicator, and USB2.0 charge. How to disable the ring LED indicator Turn on the ZBOX nano mini-PC, then press <Delete> to enter the BIOS SETUP UTILITY. Use the arrow keys to navigate to the...
Page 11
ZOTAC ZBOX nano Press <Enter> to display the and navigate to Back Light. Press <Enter> and select...
ZOTAC ZBOX nano How to enable USB2.0 charge (for S3/S4/S5 status) In Chipset menu, select and press <Enter>. Use the arrow keys to enter the item , and select Mode. Note: Before charging via USB2.0 in S5 status, please make sure the Deep S5 is disabled.
If you want a faster, less restricted way of charging your mobile phone and tablet from your mini-PC enters Standby mode (S1), Suspend to RAM (S3), Hibernation mode marvelous charging experience than ever. Please visit the ZOTAC website “Support” -> “Download” to get the USB Charging driver for your mini-PC:...
ZOTAC ZBOX nano Customizing the ZOTAC ZBOX nano Please follow the instructions below to remove the cover of the ZOTAC ZBOX nano 1. Remove the four screws securing the bottom cover into place.
ZOTAC ZBOX nano Installing a memory module 1. Locate the SO-DIMM memory slot and insert a SO-DIMM memory module into the slot at a 45 degree angle. of the memory slot.
ZOTAC ZBOX nano Installing a hard disk 1. Locate the hard disk bracket, remove the 2 screws, and remove the hard disk bracket as shown in the image below. 2. Install the hard disk bracket to a 2.5-inch SATA hard disk with 2 screws.
ZOTAC ZBOX nano 4. Reinstall the screws of the hard disk bracket. Connecting a SPDIF cable 1. Connect the SPDIF cable to the headphone/SPDIF adapter correctly. 2. Locate the front panel and connect the headphone/SPDIF adapter to the headphone/SPDIF jack.
ZOTAC ZBOX nano Setting up the ZOTAC ZBOX nano Please connect the peripherals before using the ZOTAC ZBOX nano. Connect the DisplayPort connector to the DP port. the USB 3.0 port. Connect USB 2.0 devices like wired/wireless keyboards (varying with areas),...
Page 19
ZOTAC ZBOX nano Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press the power switch on the front panel to turn on the system. Connect one end of an HDMI cable to the HDMI port on the system rear panel by default.)
4 inches (10 cm) of spacing in front of the ventilation holes. interference. Mounting the ZOTAC ZBOX nano to a LCD monitor Disclaimer: ZOTAC cannot be held liable for damages resulting from an improper installation. the ZBOX to the mount.
ZOTAC ZBOX nano Connect the ZOTAC ZBOX nano to your LCD monitor with an HDMI/DP cable. IR receiver receiver. 1. IR receiver Note: Please install CIR driver from DVD before you use the IR receiver. IR receiver 2. External USB IR receiver (please connect the external USB IR receiver to the USB2.0 port)
ZOTAC ZBOX nano Remote control (optional) ZOTAC ZBOX nano is shipped with a remote control. Follow the instructions below to use the remote control. Navigation Buttons Playback Buttons RECORD PAUSE STOP START BACK INFORMATION REPLAY SKIP PLAY LEFT Numeric Keypad...
ZOTAC ZBOX nano 1. Locate the arrow on the rear cover of the remote control, and push the cover as the arrow direction. 2. Remove the rear cover, and insert the CR2032 lithium cells into the battery jar at a 45 degree angle.
Installing system drivers Before you can use the full features of the ZOTAC ZBOX nano, the system drivers must be installed. The following types of operating systems are supported by the Follow the instructions below to install the system drivers: installation main menu will show up automatically.
ZOTAC ZBOX nano Follow the onscreen instructions for the selected driver to install. Restart the system. Using your ZOTAC ZBOX nano Please follow the instructions below to connect to a wireless network: Double-click the crossed wireless network icon (pic) in the Select the wireless network you want to connect to from the list and click Connect.
ZOTAC ZBOX nano Repeat Step 1-3 in the previous section. Select “Obtain an IP address automatically” and click “OK”. Click “Next”. Select “Connect to the Internet” and click “Next”. Select “Set up my connection manually”. Select your connection type and click “Next”.
Page 28
ZOTAC ZBOXNANO-ID61-PLUS-U Описание Характеристики...