Sleep Timer [Sleep]; Adjusting The Output Level Of The Front/Center/Surround Speakers And Subwoofer; Adjusting The Sound; Changing The Scan Mode - JVC TH-S11 Service Manual

Basic operations

Sleep Timer [SLEEP]

The system turns off automatically when the specified period of
time has passed.
Press SLEEP, with SHIFT pressed.
Each time you repeat the procedure, the shut-off time changes.
Example:
S L E E P
To check the remaining time
Press SLEEP, with SHIFT pressed once.
To change the remaining time
Press SLEEP repeatedly, with SHIFT pressed.
To cancel
Press SLEEP repeatedly, with SHIFT pressed until "SLEEP - -"
appears.
• Turning off the power also cancels the Sleep Timer.
Adjusting the output level
of the front/center/
surround speakers and
subwoofer
1
Press SPK-LEVEL to show the target
speaker indication on the display
window.
Each time you press the button, the indication of the speakers
changes as follows:
Z Z
FRONTL FRONTR
Z
SURR(surround) L SURR(surround) R
Z
SUBWFR (back to the beginning)
2
Press LEVEL +/– to adjust the output
level from -6 to 6.
NOTE
• You can also make adjustments by using the setup menu shown on the
TV screen. (See page 31.)
• The adjustments take effect for all sources.
13
minutes
6 0
Z
CENTER
Z

Adjusting the sound

1
Press BASS/TREBLE to show "BASS"
or "TREBLE" on the display window.
Each time you press the button, the indication alternates
between "BASS" and "TREBLE".
2
Press LEVEL +/– to adjust the level from
-8 to 8.
NOTE
• The adjustments take effect for all sources.

Changing the scan mode

The system can be accommodated to your TV's scan mode.
• To use the system in progressive mode, it is required that the
center unit is connected to the TV using a component video cord
(not supplied) in advance. (See page 9.)
7 While DVD is selected as the source and before playback
1
Press and hold SCAN MODE for
2 seconds, with SHIFT pressed.
The current setting appears on the display window.
2
Press Cursor 3/2 to select the desired
mode.
• INTER,: Select when your TV supports the
interlaced video input only.
• PROGRESS: Select when your TV equipped with
component jacks supports the progressive
video input.
You can get better picture quality in the order —
"PROGRESS" > S-video > Composite.
3
Press ENTER while the selected mode
is displayed.
When "PROGRESS" is selected, the PROGRESSIVE
indicator lights on the display window.
NOTE
• Although the picture may be distorted when you press ENTER, this
is not a malfunction of the system.
• There are some progressive TVs and High-Definition TVs that are
not fully compatible with this system, resulting in an unnatural
picture when playing back a DVD VIDEO in the progressive scan
mode. In such a case, change the scan mode to "INTER,".
To check the compatibility of your TV, contact your local JVC
customer service center.
• All JVC progressive TVs and High-Definition TVs are fully
compatible with this system.
See page 11 for button locations.