Sleep Timer [Sleep]; Adjusting The Output Level Of The Subwoofer And Center/ Surround Speakers [Subwfr,Center,Surrl/R]; Adjusting The Treble Sound [Treble]; Changingthe Scan Mode - JVC TH-M606 Instructions Manual

Basic operations
See page 18 for button locations. I
The system turns off automatically when the specified period of
time has passed.
Press SLEEP.
Each time you press the button, tile shut-off time changes.
Example:
[
minutes
SLEEP 60
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly.
To cancel
Press SLEEP repeatedly until "SLEEP OFF" appears.
• Turning off the power also cancels the Sleep Timer.
center/surround speakers
[SU BWFR, CENTER,
Press S.WFR +/- to adjust the subwoofer.
Press CENTER +/- to adjust the center
speaker.
Press SURR.-L +/- to adjust the surround
left speaker.
Press SURR.-R +/- to adjust the surround
right speaker.
NOTE
• You can also nmke adjustn_ents by nsing the setup n_enu shown on the
TVscreen.( :pg. 39)
• The adjustments take effect R)r all sources.
• You cannot make this adjustment when FM or AM is selected as the
source.
The system can be accommodated to your TV's scan mode.
NOTE
• To use tile system in PROGRESSIVE mode, it is reqnired that the
center unit is connected to the TV by using a component video cord
(not supplied). ( pg. 14)
• While DVD is selected as the source and stopped
Press and hold SCAN MODE for
2 seconds.
"INTERLACE" or "PROGRESSIVE" appears on the display
window.
2 Press Cursor =,-/_ to select the desired
mode.
• INTERLACE: Select this when your TV supports the
interlaced video input only.
• PROGRESSIVE: Select this when your TV equipped with
component jacks supports the progressive
video input.
You can get better picture quality in PROGRESSIVE mode
than in INTERLACE mode.
3 Press ENTER while the selected mode
is displayed.
When "PROGRESSIVE" is selected, tile PROGRESSIVE
indicator lights on the display window.
NOTE
• Although the picture may he distorted when you press ENTER, Ihis
is 11ola malfunction of the system.
• "INTERLACE" is selected at your purchase.
i There are some progressive TVs and High-Definition TVs that are
not fully compalible with this system, resulling in an unnatural
picture when playing back a DVD VIDEO in the progressive scan
mode. In such a case, change the scan mode to "INTERLACE".
To check the compalibilily ol your TV, conlacl your local JVC
customer service center.
All JVC progressive TVs and High-Definilion TVs are fnlly
compatible with tiffs system.
Press TREBLE +/-.
NOTE
• The adjustments
take effect li_wall sources.
2O