JVC TH-S11 Service Manual page 14

3.1.10 Removing the transformer board
(See Fig.16)
• Remove the metal cover.
(1) From the top side of the main body, disconnect the wires
from the connectors CN950,
board.
(2) Disconnect the wires from the connectors
main board.
(3) Remove the three screws R attaching the transformer
board.
(4) Take out the transformer board from the main body.
3.1.11 Removing the power transformer
(See Fig.17)
• Remove the metal cover.
(1) From the top side of the main body, remove the tie bands
and wire clamp bundling the wires.
(2) Disconnect the wire from the connector
transformer board.
(3) Disconnect the wire from the connector
board.
Reference:
After connecting the wires to the connectors, bundle the
wires with the wire clamps and new tie bands as before.
(4) Remove the four screws S and take out the power trans-
former from the main body.
1-14 (No.MB413)
CN952 on the transformer
CN101 on the
CN952 on the
CN102 on the main
R
CN952
R
CN950
Power cord
Fig.16
Power transformer
S
S
Tie
bands
CN952
Transformer board
Fig.17
CN101
Transformer board
Wire clamp
S
CN102
Main board