Download Print this page
Craftmade JU54 Juna Installation Instructions Manual

Craftmade JU54 Juna Installation Instructions Manual

Ceiling fan

Advertisement

Quick Links

Juna

Ceiling Fan

Installation Instructions
Instrucciones de instalación
Instructions d'installation

Advertisement

loading
Need help?

Need help?

Do you have a question about the JU54 Juna and is the answer not in the manual?

Questions and answers

Summary of Contents for Craftmade JU54 Juna

  • Page 1: Ceiling Fan

    Juna Ceiling Fan Installation Instructions Instrucciones de instalación Instructions d’installation...
  • Page 2 Read and Save These Safety Precautions 1. Turn off electricity at main switch before wiring or servicing fan in order to avoid possible electrical shock. 2. All wiring must be in accordance with the National Electric Code (ANSI/NFPA70-1999) and local electrical codes.
  • Page 3 Before Assembly 1. Make sure that the fan voltage (120) is compatible with your own electrical system. 2. Check to make sure that your carton contains all the parts mentioned in the parts list. NOTE: The box can be used as a work space to prevent any damage on the ornamental surface.
  • Page 4 Screw Package Quantity S1. Wood Screws & Washers S2. Bracket Screws S3. Blade Screws & Paper Washers S4. Blade Arm Screws S5. Wire Connectors S6. Safety Bolt & Nut S7. "J" Hook S8. Zip Tie Tools You Need 1. Phillips Screwdriver 2.
  • Page 5 Turn off circuit breakers and wall switch to the fan supply line leads. Important: When using an existing outlet box, be sure the box is Preparation securely attached to the building structure and can support the full weight of the fan. Failure to do so can result in serious injury or death. b.) Angle Mount IMPORTANT: If using the angle mount method, check to make sure the ceiling angle is not steeper than 35º.
  • Page 6 Installing Mounting Bracket Support Beam “J” Hook (S7) Outlet Box (A) OUTLET BOX Ceiling Mounting Bracket (1) Bracket Screws & Washers (S2) Wood Screws (S1) Wood Screws (S1) NOTE: Do not mount directly to sheet rock or ceiling tile. Prior to securing mounting bracket, screw "J" hook (S7) into ceiling outlet box as a secondary support means.
  • Page 7 Downrod Assembly Locate downrod assembly (#2). Loosen ball screw on black hanging ball to free lock pin. Black hanging ball will slide down. Remove ground screw and green ground wire. Remove hanging ball from downrod and save all parts. Insert fan wires through downrod.
  • Page 8 Thread the downrod onto the motor housing making sure the wires don’t get twisted. Insert saftey bolt (S6) through flange & downrod and attach nut. Tighten firmly. Tighten set screw against downrod.
  • Page 9 Place Flange Cover (6), Anti-Sway Adapter (5) and Canopy (4) over downrod assembly. WARNING: Failure to completely tighten downrod as described in steps above could result in the fan loosening and possibly falling. Replace hanging ball, insert hanging pin through downrod and tighten set screw through hanging ball into downrod.
  • Page 10 Lift fan onto the mounting bracket (#1). Turn housing until hanging ball seats itself into ball socket (listen for click). For added security, thread the safety cable through the nut and make a ring as shown, thread the safety cable into the nut and secure by tightening the screw. Attach safety cable from fan unit to "J"...
  • Page 11 Ground 1. Connect fan wires to ceiling Wire White (Neutral) Connectors wires: white fan wire to white outlet (S6) wire, black to black and green to Black (Power) green. Wire connectors (S5) are provided for your convenience. Ground White (Green) 2.
  • Page 12 Remove two screws from the hanger bracket and reserve. Align the canopy up to ceiling and over the screw holes. Secure the canopy by tightening the removed screws. Step 1. Attach the fan blades to blade arms with screws (S3). Tighten securely.
  • Page 13 Remove one of the three set screws on the mounting ring and loosen the other two screws, do not remove. Snap the light kit connection plugs before installing the light kit. Align the keyholes of the mounting plate with the loosened screws, and tighten the three screws securely.
  • Page 14 Remote Control Operation Instructions ON/OFF For emergency shut off. SPEED Controls fan motor speed. To select desired speed, press CONTROL button once and release. REVERSE Controls direction of fan blades. To reverse fan blades, press once and release. FAN OFF or Turns fan motor speed off.
  • Page 15: Important! Please Read

    PROPER CARE In order to maximize the appearance of your Craftmade ceiling fan, it is important that dust and debris is removed from the surface periodically. It is recommended that the motor housing be wiped down weekly using a soft, dry or damp cloth and the blades cleaned with a soft, dry or damp cloth or fan blade duster.