Read and Save These Safety Precautions What You Have Turn off electricity at main switch before wiring or servicing fan in order to avoid Parts Quantity possible electrical shock. All wiring must be in accordance with the National Electric Code (ANSI/NFPA 1.
Page 3
Step 3 Continued Preparation Important: When using an existing outlet box, be sure the box is securely “J” Hook (S7) attached to the building structure and can support the full weight of the fan. Support Beam Failure to do so can result in serious injury or death. Ceiling OUTLET BOX Step 1...
Page 4
Step 5 Step 6 1. Connect fan wires to ceiling wires: white fan wire to white outlet wire, For added security, attach safety cable from fan unit to "J" hook (S7) in black to black and green to green. Wire connectors (S5) are provided for outlet box.
Page 5
Step 8 Step 7 For blade assembly, position blade arms and blade (4) so that all screw Line up arrow on mounting plate (1) to arrow on fan body inner housing holes are aligned (as shown in figure below). Using blade screws (S4), plate (2).
Operation Instructions Electrical Connections Connect black and blue (if provided) fan wires to black outlet wire. 1. The sequence of operation for the motor pull/chain switch is Connect white fan wire to white outlet wire and green grounding lead OFF-HI-MED-LOW. wire from the grounding conductor to the supply circuit (see figure A).
Electrical Connections Continued… Ground White Black Black Switch Black Green Light Switch White Blue Figure C Optional Light Common Problems Problem A: Fan Will not Start Remedies: 1. Check fuse or circuit breaker and replace if necessary 2. Turn off electrical power and check all wire connectors. 3.
Need help?
Do you have a question about the WarPlanes WB242 and is the answer not in the manual?
Questions and answers