Craftmade Woven WVN52 Installation Manual
  1. Manuals
  2. Brands
  3. Craftmade Manuals
  4. Fan
  5. Woven WVN52
  6. Installation manual

Craftmade Woven WVN52 Installation Manual

Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
Woven
Installation Guide
For Model:
WVN52
4007498
net weight of fan: 16.27 lb (7.38 kg)
READ THESE INSTRUCTIONS AND
SAVE THEM FOR FUTURE USE

Table of Contents:

Wiring. pg. 6
Warranty.pg. 9
page 1
PRINTED IN CHINA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Woven WVN52 and is the answer not in the manual?

Questions and answers

Related Manuals for Craftmade Woven WVN52

Summary of Contents for Craftmade Woven WVN52

  • Page 1: Table Of Contents

    READ THESE INSTRUCTIONS AND SAVE THEM FOR FUTURE USE Woven Installation Guide For Model: WVN52 Table of Contents: Safety Tips. pg. 2 Unpacking Your Fan. pg. 3 Parts Inventory. pg. 3 Installation Preparation. pg. 4 Hanging Bracket Installation. pg. 4 Fan Assembly.

  • Page 2: Safety Tips

    (2) this LED light kit must accept any interference received, including interference that may cause undesired operation. Distributed by: Craftmade, 3901 South 20 Avenue, DFW Airport, TX, 75261; 1-800-486-4892 NOTE: The important safety precautions and instructions appearing in the manual are not meant to cover all possible conditions and situations that may occur.

  • Page 3: Unpacking Your Fan

    1. Unpacking Your Fan. Carefully open the packaging. Remove items from Styrofoam inserts. Remove motor housing and place on carpet or Styrofoam to avoid damage to finish. Do not discard fan carton or Styrofoam inserts should this fan need to be returned for repairs. Check against parts inventory that all parts have been included.

  • Page 4: Installation Preparation

    3. Installation Preparation. blade edge To prevent personal injury and damage, ensure that inches the hanging location allows the blades a clearance of 7 feet (76cm) (2.13m) 7 ft. (2.13m) from the floor and 30in. (76cm) from any wall or obstruction. This fan is suitable for room sizes up to 400 square feet 12ft.

  • Page 5: Fan Assembly. Pgs

    5. Fan Assembly. stop pin set screw Remove hanging ball from downrod provided by loosening set screw on hanging ball. Remove pin and clip. Lower hanging ball and remove stop pin. hanging ball Then slide hanging ball off of downrod. [Refer to diagram 1.] clip diagram 1...

  • Page 6: Wiring

    5. Fan Assembly. (cont.) safety cable loop wood ceiling With the hanging bracket secured to the outlet box and joist able to support the fan, you are now ready to hang your fan. Grab the fan firmly with two hands. Slide downrod wood screw through opening in hanging bracket and let hanging ball and washer...

  • Page 7: Canopy Assembly

    7. Canopy Assembly. Locate 2 screws on underside of hanging bracket and remove screw closest to the open end of the hanging hanging bracket bracket. Partially loosen the other screw. Lift canopy to hanging bracket. Place rounded part of slotted hole in screw canopy over loosened screw in hanging bracket and push up.

  • Page 8: Light Kit Assembly

    9. Light Kit Assembly. motor Remove 1 screw from motor plate on underside of housing motor housing and partially loosen the other 2 screws. Align slotted holes in center of shade with loosened screws in motor plate, allowing male plug from motor housing to come through hole in middle of shade.

  • Page 9: Troubleshooting

    Service at 1-800-486-4892 to arrange for return of fan. 1. Check wall switch to fan. Return fan, shipping prepaid, to Craftmade. We will repair 2. Verify that reverse switch is set completely in or ship you a replacement fan, and we will pay the return either direction.

Table of Contents