Setup; Step 1: Connect Your Monitor To Your Computer - Sony Trinitron CPD-G200 Operating Instructions Manual

Setup

Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• HD15 video signal cable (1)
• Power Mac G3 (sold after Jan., 1999) adapter (1)
• Windows Monitor Information Disk (1)
• Warranty card (1)
• Notes on cleaning the screen's surface (1)
• This instruction manual (1)
Step 1: Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
Note
Do not touch the pins of the video cable connector as this might bend the
pins.
x Connecting to an IBM PC/AT or compatible
computer
AC IN 2 (HD15)
to video output
IBM PC/AT or
compatible computer
6
1 (HD15)
x Connecting to a Macintosh computer
Use the supplied Power Mac G3 (sold after Jan., 1999) adapter.
AC IN 2
Power Mac G3 (sold after Jan.,1999)
adapter (supplied)*
Power Mac G3
(sold after Jan., 1999)
* When connecting to a Power Mac G3 series computer (sold after
January, 1999), you must use the supplied adapter. The Power Mac G3
adapter can be used with either video input 1 or 2.
If your Macintosh video connector has two rows of pins, you will need
a different adapter. Contact your authorized Sony dealer for more
information.
x x x x Connecting to a second computer
AC IN 2
to HD15
Refer to the preceding examples
to connect to your computer.
(HD15)
1 (HD15)
to video
output
(HD15)
1 (HD15)
HD15 video
signal cable
(supplied)