Table of Contents
Advertisement
6 - Information / Configuration
6.11.1.3
Restore Default
Object: This menu is used to return to factory configuration.
The existing configuration is completely overwritten.
•
Select the
Restore Default
display the following screen:
•
Select the configuration file then click on the Restore Default Settings button and the
following screen appears:
•
Click on the OK button if you really want to return to the factory configuration.
A few moments after, the screen of the "Internet Connection" menu appears. Refer to paragraph
6.6.
All the LEDs go off except for the green "
activated); the green "
returning to the factory configuration starts. It lasts for around 2 minutes.
SAGEM F@st™ 240x/244x Reference Manual - 288097371-02
Page 6-122
Sagem Communication document. Reproduction and disclosure prohibited
sub menu in the
Settings
" LED (WLAN) (if the wired network is
" LED (PWR) then all the LEDs and the process for
menu of the
Management
section to
Advertisement
Table of Contents
Troubleshooting
