RAIS 600 User Manual page 15

ENGLISH RAIS - Manual for Rais 600 & Rais 80
Installation
Disassemble the frame (1) from the outer mantle (4), disassemble the door (2) from the
insert (3) and remove the insert from the outer mantle.
Now disassemble the baffelplate and the smoke leader (please look at the part for clea-
ning of the flue ways - page 21).
Mount the outer mantle in the building-in hole - rembember to level the stove.
Now mount the insert into the outer mantle - please note: the dowels in the bottom of
the insert have to fit into the holes of the bottom of the outer mantle.
Then reassemble the door and the frame by means of the 2 nuts together with the 4 nuts
delivered separately in a small bag.
The tube (flexible or solid) can then be attached to the offset box/collar on the insert
It is very important that the connection between the tube and the insert is tight. We re-
commend to use a sealer as it is of utmost importance that this is tight.
Finally assemble the baffle-plate and the smoke leader in reverse order.
RAIS recommends that a sealer be used between the insert and the face of the opening.
15