ENGLISH
RAIS - Manual for Rais 600 & Rais 80
Installation
C
Disassemble the frame (1) and the door (2) from the insert (4).
Now disassemble the baffle-plate (3) - (please look at the part for cleaning of the flue
ways - page 21).
Assemble the smoke adapter (5) on flexible or solid tube.
It is very important that the connection between the tube and the insert is tight. We re-
commend to use a sealer as it is of utmost importance that this is tight.
Mount the insert in the building-in hole - adjust with the help of the 4 adjusting screws.
Remember to level the stove.
Put your hand up in the smokepipe, grip the smokeadapter (5) and pull it down until stop.
Bend the two "flap" on the smokeadapter to each side - these would hold the adapter in
place.
Finally mount the baffle-plate - assemble in reverse order. Push the baffle-plate back into
the firechamper and place it on the skamol in both sides.
13