Removing The Starter Motor; Removing The Flywheel Magneto - PIAGGIO MSS Fly 50 4T Workshop Manual

Engine

Removing the starter motor

- Undo the screw on the power positive contact
and disconnect the cable
- Undo the 2 screws fixing the starter motor to the
crankcase and recover the power wiring.

Removing the flywheel magneto

- Lock the rotation of the flywheel using the calliper
spanner.
- Remove the nut.
CAUTION
THE USE OF A CALLIPER SPANNER OTHER THAN THE
ONE SUPPLIED COULD DAMAGE THE STATOR COILS
- Extract the flywheel with the extractor.
Specific tooling
020565Y Flywheel lock calliper spanner
020162Y Flywheel extractor
ENG - 80
MSS Fly 50 4T