Electrical system
Turn signal lights
1
2
3
4
Two (2) turn signal warning light bulbs
5
6
7
8
9
Checks and inspections
In case the cause of ignition failure or malfunction
cannot be easily identified at sight, first of all re-
place the control unit by another one in operating
conditions.
Remember that the engine must be off to discon-
nect and replace the control unit.
If after replacement the vehicle starts properly, the
control unit is failing and must be replaced.
ELE SYS - 52
TURN INDICATORS AND HORN
Specification
Indicators switch
Horn button
Horn
4 Turn indicator bulbs
Voltage regulator
Key switch contacts
Fuse
Battery
MSS Fly 50 4T
Desc./Quantity
12V - 2W
12V-10W
10 A
12V-9Ah