Connect To Scanner Wi-Fi Access Point - Pandigital S8X1103 User Manual

 By default, the Preview mode is on allowing you to preview the scanned image for
2 seconds immediately after scanning. Two options appear on the screen with the image allowing
you to press
displays during deletion). (Refer to page 19 to set the Preview mode.)
 Preview of PDF scans are not displayed on the LCD screen; the scans are saved immediately
when scan is completed.
8. Wait until the indicator light stops blinking before inserting and scanning the next original.
9. To view/retrieve your scanned images, refer to "Scanned Images" section on page 12.
C o n n e c t t o S c a n n e r W i -­‐ F i A c c e s s P o i n t
Using the scanner's Wi-Fi connection, you can wirelessly connect to your private cloud to
browse or download your scanned image files from the scanner to your computer, Android
device, or iOS devices.
Note: The Scanner Wi-Fi access point is for browsing, downloading, or deleting scanner files only. It cannot
be used for Internet browsing.
(a)
(c)
16
OK
to save (default) or
a. Turn Wi-Fi mode on by sliding switch to
b. Wait approximately 40 seconds while the data is
indexed, the Wi-Fi blue LED flashes, and the Wi-Fi
Ready screen is displayed.
c. To connect your computer, iPhone, iPad or Android
device to the scanner, use the device's Wi-Fi settings to
select the scanner's network ID "Pandigital-XXXX" [last
four digits of Access Point's MAC address]".
PC users: Go to the Wi-Fi Network icon and select the
network ID (Pandigital-XXXX). No password is required;
wait for the connected status confirmation.
Mac users: Click the
bar and select the network ID (Pandigital-XXXX). No
password is required; wait for the connected status
confirmation.
Make sure you are connected to only one IP interface
(either Wi-Fi or Ethernet port). The Wi-Fi client IP would
be 10.10.100.x range.
iPhone & iPad users: Go to
the network ID (Pandigital-XXXX). No password is
required; wait for the check mark to confirm the
connected status.
Delete
to the image immediately (delete confirmation
Wi-­‐Fi n etwork
Settings
On
position.
icon on the menu
Wi-­‐Fi
→ select
→