Loading Positive Slides; Connect Scanner To Pc - Pandigital PhotoLink PANSCN03 User Manual

Loading Positive Slides

Open the slide tray at the marked spot on the top. With the slide
tray laid open, place the slide into the recessed area in the tray;
the slide should fit very well.

Connect Scanner to PC

CAUTION: If connecting to a laptop, be sure it is plugged into
8
Close the negative tray and press the edges so
that it locks into place.
Handle slides with care; any dust, scratches,
or finger prints will appear on your saved
images. If possible, use cotton gloves when
handling slides. It is recommended to use
compressed air to remove any dust on the
slides (not included).
Hold up the slide towards light, facing the
statement "this side toward screen" away from
you. Look through the slide; it should appear
normally (not upside down).
Close the tray and press the edges so that it
locks into place.
an AC outlet to ensure sufficient power for the
scanner.