Photo Stitching (Wand Scans Only); Menu - Settings; Resolution - Pandigital S8X1103 User Manual

Portable wand scanner with feeder dock
Hide thumbs Also See for S8X1103:
Table of Contents

Advertisement

P h o t o   S t i t c h i n g   ( w a n d   s c a n s   o n l y )  
You can convert collective wand-scanned JPG files into panoramic photos by using the scanner's
Stitching (STC) mode and PageManager software. This is especially helpful when scanning an
original wider than 8.5".
 To use the image stitching feature effectively, you should scan your originals with the right edge of the
original aligned against the left edge of the Stitch mark on the front of the scanner.
 For best stitching, allow at least a 2" (45mm) overlap of edges on the original when scanning
1.
Press
2.
To enter Stitching mode, use one of the following methods:
A. Press
OR
B. Use the
1) With the "Scan Ready"
2) Press
3.
With your document on flat smooth surface, press
side of the image. When completed, the LCD indicates stitch (1) is complete.
4.
Press
5.
Scan the next section of the document to the right of the last scanned section, allowing at
least a 2" overlap over the right side of the last scanned section.
6.
Repeat steps 3-5 until the entire document has been scanned (maximum 6 scans).
Be sure you have sufficient overlaps on the edges of the photos, maps, or other originals you want to
stitch, and press
M e n u   -­‐   S e t t i n g s  
Resolution  
The scan resolution is measured in DPI (dots per inch). The higher the DPI, the more details
on the original are captured by the scanner and produce a higher quality scanned image.
20
to turn the scanner on.
for 2 seconds.
Stitching
option in the Menu mode:
Stitching
to scroll to
again to stop the scan.
before and after each scan.
screen displayed, press
, and then press
7.
As scans are completed, a series of JPG files are
generated and stored in a folder titled
8.
Use PageManager Import to import the images
into your computer.
9.
Select the files and drag-n-drop to Stitch Icon
located in the application launch bar. PageManager
will process the selected images.
10.
Save the new panoramic photo on the
PageManager workspace on your computer.
11.
You can repeat same process to generate more
panoramic photos.
to enter Menu mode.
to select it.
to begin the first scan down the left
300STC
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents