Software Installation - Pandigital S8X1103 User Manual

Software I nstallation
Install the software from the included CD:
1. Connect the scanner to your computer via the included microUSB cable. Make sure the
Wi-Fi connection is off. The scanner must be connected to the computer during software
installation for the software to automatically activate.
2. Turn the scanner on.
3. Insert the Pandigital CD, containing the PageManager software, into the CD/DVD drive
on your computer.
4. WINDOWS: In a Windows Explorer window, click on the volume titled
Pandigital\Software
MAC: Double-click the
5. Single Installation Method
WINDOWS: Double-click
MAC: Double-Click
*This is a software installation launcher for all three software which include PageManger
XE software, CreateXE software, Stitching software.
To install each software individually, follow the instruction below. The installation launcher may not
work on OS 10.5.8 PowerPC based Mac (we recommended & tested on OS 10.5.8 Intel based Mac).
6. To install the PageManger XE software individually:
WINDOWS: Double-click
MAC: Double-click
*x's are replaced by the specific file name and version (i.e., Presto_PM9.08_PC and
setup.exe for PC, and Presto_PM9.08_Mac and PM908_Setup.mpkg for Mac).
7. To install the CreateXE software individually:
WINDOWS: Double-click
MAC: Double-click
8. To install the Stitching software individually:
WINDOWS: Double-click
MAC: Double-click
9. Follow the on-screen instructions to install (or remove) the software.
 If you are re-installing the software, the
previous version of PageManager, including annotations and stacked files. However, you must
perform OCR again if you did not save the files that were processed with OCR as a different file
type.
 For Windows PC operating instructions, refer to page 32
 For Macintosh operating instructions, refer to page 37.
 To install the bonus graphic editing and video creation software included on the CD, refer to page
40.
.
CD
i con on the desktop. Then double click Pandigital\Software.
Setup_PC.exe*
Setup_Mac.app*
.
Presto_PMxxx_PC\setup.exe*
Presto_PMxxx_Mac\PMxxx_Setup.mpkg*
Presto_PMxxx_PC\CreateXE\cxeinst.exe
Presto_PMxxx_Mac\CreateXE\cxeInstaller.dmg
Presto_PMxxx_PC\AutoStitch\Stitch_Setup.exe
Presto_PMxxx_Mac\AutoStitch\Stitch_Setup.pkg
Import O ld D ata
.
.
function retrieves the data from the
.
.
.
.
.
31