Supported Memory Cards; Introduction; Photolink Scanner Overview - Pandigital PhotoLink PANSCN04 User Manual

Supported Memory Cards

MS (MemoryStick)
MS Pro
MS Pro Duo
MS Duo
MMC (MultiMediaCard)
RS-MMC (adapter required)
I n t r o d u c t i o n
Welcome to the Pandigital PhotoLink Scanner.
Now you can scan your printed photos and store them on your memory card, no computer is necessary. Simply insert a memory
card into the scanner, and power it on. When the unit is ready, feed your printed photo into the scanner and your images will be
stored in the memory card. It's as easy as that.
If you want to store your photos directly into your PC, it's just as easy via a USB cable and our Scan To PC software (refer to page
10).
P h o t o L i n k
Front View
No. Name
Resolution
Calibration
Power Button
Paper Guide Slide
Indicator light
Orientation Guide
Memory card slots
Feeding Slot
Rear View
No. Name
Output slot
Mini USB connector
Power connector
4
S c a n n e r O v e r v i e w
Function/ Description
Set 300dpi or 600dpi
Calibrate the scanner
Press to power on or off.
Slide the guide to adjust for various sized originals to ensure the proper alignment.
Indicates the operating status of the scanner and memory card.
Indicates the correct position and orientation of the original for proper scanning.
Refer to "Supported Memory Cards" on page 4 for accepted memory cards.
Insert an original to begin scanning.
Function/ Description
The scanned original comes out from this slot.
For connecting to a computer via a USB cable.
For connecting to the supplied power adapter.
xD (extreme Digital, H-type and M-type)
SD (SecureDigital)
SD HC
Mini SD (adapter required)
Micro SD/T-Flash (adapter required)