IBM T84H Setup Manual page 16

T84H_setup0926_final.fm Page 17 Thursday, October 5, 2000 8:45 AM
OSD Icon Description
IMAGE LOCK
(continued)
Select the preset Color mode you
find most comfortable and then
fine tune the colors using the User
submenu, if necessary.
COLOR
Resets the Brightness, Contrast,
Image Lock Fine and Coarse,
Color, H-Position, V-Position, and
RESET
Display Size settings.
Moves the screen left and right.
H-POSITION
Moves the screen down and up.
V-POSITION
If your computer or video board
supplies a signal rate and
addressability lower than 1280 x
DISPLAY 1024, this LCD monitor provides a
SIZE scaling processor that can
expand the addressability up to
1280 x 1024.
Sub- Controls and
menu(s) Adjustments(Analog)
Use the Arrow buttons to
MANUAL -
adjust away the
interference. If
• Fine
satisfactory results are
• Coarse
not obtained using the
Fine adjustment, use the
Coarse adjustment and
then use Fine again.
This function may
change the width of the
display image. Use the
H-Position function to
center the display image
on the screen.
PRESET 1 - (Cool White)
2 - (Normal White)
3 - (Warm White)
USER
• Red Increases or decreases
redness
• Green Increases or decreases
greenness
• Blue Increases or decreases
blueness
NO - Does not make the
adjustment
YES - Resets the
settings
EXPANDED
1 - Image enlarged to fill
the entire screen.
2 - Image enlarged to fill
the width of the screen
only.
NORMAL Image at normal size.
Controls and
Adjustments(Digital)
Controls Locked
Controls Locked
Controls Locked
Controls Locked
Controls Locked
Same as Analog
17