Basic Specifications; Unpacking; Set Up Instructions; Location - Chicago Electric 98391 Set Up, Operating, And Servicing Instructions

Basic speciFications

Type
Fuel
Capacity
Type
Engine Oil
Capacity
Rated Wattage
Maximum Wattage
Run Time @ 75% Load 8.5 Hours with full tank
Sound Level
note: Additional specifications found in
the TECHNICAL ENGINE SPECIFI-
CATIONS chart in this manual.
At high altitudes, the engine's carbu-
retor, governor, and any other parts that
control the fuel-air ratio will need to be
adjusted by a qualified mechanic to allow
efficient high­altitude use and to prevent
damage to the engine and any other de-
vices used with this product.

unpacKing

When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.

set up instructions

read the entire iMportant
saFetY inForMation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
SKU 98391 For technical questions, please call 1-800-444-3353.
#2 Diesel Fuel
4.2 Gallons
SAE 5W40
1-3/4 qts.
5,000 Watts
6,000 Watts
75 dB @ 23'
FroM acciDental
starting:
turn the power switch of the
equipment to its "oFF"
position, wait for the engine to
cool before assembling or
making any adjustments to
the equipment.
operate only with proper
spark arrestor installed.
operation of this equipment
may create sparks that
can start fires around dry
vegetation.
a spark arrestor may be
required.
the operator should contact
local fire agencies for laws
or regulations relating to fire
prevention requirements.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.

location

1. The Generator must be installed
outdoors where ventilation is readily
available.
2. Install the Generator so that the air
inlets and outlets are not blocked by
obstruc tions such as bushes, trees,
or snow drifts. Locating it in the path
of heavy winds or snowdrifts may
require the placement of a barrier for
protection. The air inlet should face
the prevailing wind direction.
to prevent
serious injurY
to prevent
serious injurY:
Page 8