Power Management; Product Disposal - IBM ThinkVision L150 User Manual

Power Management

If your computer has
previously been used
with a CRT monitor and is
currently configured to a
display mode outside the
range that the Flat Panel
monitor can display, your
monitors failsafe feature
will display an image
sufficient to allow you to re-
configure the computer,
preferably to 1024 x 768 at
60Hz.

Product Disposal

The power management feature is invoked when the computer recognizes
that you have not used your mouse or keyboard for a user-definable period.
There are several states as described in the table below.
®
As an Partner, IBM has determined that this product meets the
E S
NERGY TAR
®
guidelines for energy efficiency.
E S
NERGY TAR
For optimal performance, switch off your monitor at the end of each working
day, or whenever you expect to leave it unused for long periods during the
day.
Power
State
Indicator
On Steady green
Active Off Blinking green
* There may be a slight delay before the picture reappears.
The fluorescent lamp in the liquid crystal display contains a small amount of
mercury. Dispose of it as required by local ordinances and regulations.
Restoring
Screen
Operation
Normal
Press a key or
Blank
move the mouse. *
Compliance
®
E S
NERGY TAR
21