Power Management - IBM 9513AG1 - T 55A - 15" LCD Monitor User Manual

Power Management

If your computer has
previously been used with a
CRT monitor and is currently
configured to a display mode
outside the range that the Flat
Panel monitor can display, you may
need to re-attach the CRT monitor
temporarily until you have re-
configured the computer,
preferably to 1024 x 768 at 60Hz.
20
To benefit from power management, the monitor must be used in conjunction
with a computer that implements the Video Electronics Standards
Association (VESA) Display Power Management Signalling (DPMS)
Standard.
The power management feature is invoked when the computer recognizes
that you have not used your mouse or keyboard for a user-definable period.
There are several states as described in the table below.
®
As an Partner, IBM has determined that this product meets the
E S
NERGY TAR
®
guidelines for energy efficiency.
E S
NERGY TAR
IBM recommends that you switch off your monitor at the end of each working
day, or whenever you expect to leave it unused for long periods during the
day.
Power
State
Indicator
On Steady green
DPMS
Steady amber
Standby
Flashing
DPMS amber
Suspend (0.5 sec.
interval)
Flashing
amber
DPMS Off
(1 sec.
interval)
‡ There may be a slight delay before the picture reappears.
Restoring
Screen
Operation
Normal
Press a key or
Blank
move the mouse.
Press a key or
Blank
move the mouse. ‡
Press a key or
Blank
move the mouse. ‡
Compliance
TAR ®
E S
NERGY
and NUTEK
®
E S
NERGY TAR
and NUTEK
®
E S
NERGY TAR
and NUTEK