Power Management; Product Disposal - IBM T750 User Manual

Power Management

If your computer has
previously been used
with a CRT monitor and is
currently configured to a
display mode outside the
range that the Flat Panel
monitor can display, you
may need to re-attach the
CRT monitor temporarily
until you have re-configured
the computer, preferably to
1280 x 1024 at 60Hz.

Product Disposal

To benefit from power management, the monitor must be used in conjunction
with a computer that implements the Video Electronics Standards Association
(VESA) Display Power Management Signalling (DPMS) Standard.
The power management feature is invoked when the computer recognizes
that you have not used your mouse or keyboard for a user-definable period.
There are several states as described in the table below.
®
As an Partner, IBM has determined that this product meets the
E S
NERGY TAR
®
guidelines for energy efficiency.
E S
NERGY TAR
For optimal performance, you switch off your monitor at the end of each
working day, or whenever you expect to leave it unused for long periods
during the day.
Power
State
Indicator
On Steady green
DPMS
Steady amber
Standby
DPMS
Steady amber
Suspend
DPMS Off Steady amber
* There may be a slight delay before the picture reappears.
The fluorescent lamp in the liquid crystal display contains a small amount of
mercury. Dispose of it as required by local ordinances and regulations.
Restoring
Screen
Operation
Normal
Press a key or
Blank
move the mouse.
Press a key or
Blank
move the mouse. *
Press a key or
Blank
move the mouse. *
Compliance
®
E S
NERGY TAR
and NUTEK
®
E S
NERGY TAR
and NUTEK
®
E S
NERGY TAR
and NUTEK
25