Further Information; Display Modes - IBM ThinkVision L150 User Manual

Further Information

Display Modes

For image problems, you
may want to run AUTO
Setup again before consulting this
section. In most cases, AUTO
SETUP can fix the problems. See
)
Image Setup ( for DOS on
Page 12 for details.
20
Your computer controls the monitor's display mode. Refer to your computer
documentation for details on how to change display modes.
The image size, position and shape might change when the display mode
changes. This is normal and the image can be readjusted using
( ) and the monitor controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker,
TFT technology is inherently flicker-free. If possible, configure your computer
for 1024 × 768 addressability at 60Hz vertical refresh rate.
For the display modes listed on the next page, the screen image has been
optimized during manufacture.
Factory Set Display Modes
Addressability
640 × 350
640 × 480
640 × 480
640 × 480
640 × 480
720 × 400
800 × 600
800 × 600
800 × 600
800 × 600
832 × 624
†
1024 × 768
1024 × 768
1024 x 768
† Recommended
Note: VESA timings are as detailed in the VESA "Display Monitor Timing Specification".
Version 1.0, Revision 0.8, dated 09/17/98.
Refresh Rate
70 Hz
75 Hz
72 Hz
66 Hz
60 Hz
70 Hz
56 Hz
60 Hz
72 Hz
75 Hz
75 Hz
60 Hz
70 Hz
75 Hz
I S
MAGE ETUP
Horizontal Frequency
31.5 kHz
37.5 kHz
37.8 kHz
35.0 kHz
31.5 kHz
31.4 kHz
35.1 kHz
37.8 kHz
48.0 kHz
46.8 kHz
49.7 kHz
48.4 kHz
56.5 kHz
60.0 kHz