Further Information; Display Modes - IBM 9512AB1 - T 541 - 15" LCD Monitor User Manual

Further Information

Display modes

i
If your computer has
previously been used with
a CRT monitor and is currently
configured to a display mode
outside the range that the Flat
Panel monitor can display, you
may need to re-attach the CRT
monitor temporarily until you
have reconfigured the
computer, preferably to 1024 x
768 at 60Hz.
18
The display mode the monitor uses is controlled by the computer. Therefore,
you should refer to your computer documentation for details on how to
change display modes.
The image size, position and shape may change when the display mode
changes. This is normal and the image can be readjusted using AUTO SETUP
and the monitor controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker,
TFT technology is inherently flicker-free. If possible, configure your computer
for 1024 x 768 addressability at 60Hz vertical refresh rate.
For the display modes listed below, the screen image has been optimized
during manufacture.
Factory Set Display Modes
Addressabillty
640 x 480
640 x 480
640 x 480
640 x 350
720 x 400
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768 †
1024 x 768
1024 x 768
† Recommended
Note : VESA timings are as detailed in the VESA "Display Monitor Timing
Specification". Version 1.0, Revision 0.8, Dated 09/17/98.
Refresh Rate
60 Hz
66 Hz
75 Hz
70 Hz
70 Hz
56 Hz
60 Hz
72 Hz
75 Hz
75 Hz
60 Hz
70 Hz
75 Hz
Horizontal
Frequency
31.5 kHz
35.0 kHz
37.5 kHz
31.5 kHz
31.5 kHz
35.2 kHz
37.9 kHz
48.1 kHz
46.9 kHz
49.7 kHz
48.4 kHz
56.5 kHz
60.0 kHz