Table of Contents
Advertisement
Further information
Display modes
i
If your computer has
previously been used with
a CRT monitor and is currently
configured to a display mode
outside the range that the Flat
Panel monitor can display, you
may need to re-attach the CRT
monitor temporarily until you
have reconfigured the
computer, preferably to 1280 x
1024 at 60Hz.
Note: VESA timings are as
detailed in the VESA
"Display Monitor Timing
Specification". Version 1.0,
Revision 0.8, Dated
09/17/98.
22
The display mode the monitor uses is controlled by the computer.
Therefore, you should refer to your computer documentation for details on
how to change display modes.
The image size, position and shape may change when the display mode
changes. This is normal and the image can be readjusted using Image
setup and the monitor controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker,
TFT technology is inherently flicker-free. If possible, configure your
computer for 1280 x 1024 addressability at 60Hz vertical refresh rate.
For the display modes listed below, the screen image has been optimized
during manufacture.
Factory set display modes
Addressability
640 x 350
640 x 480
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024 †
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
† Recommended
Refresh rate
Horizontal frequency
70.8 Hz
59.9 Hz
66.6 Hz
72.8 Hz
75.0 Hz
70.1 Hz
60.3 Hz
72.1 Hz
75.0 Hz
74.5 Hz
60.0 Hz
70.0 Hz
75.0 Hz
75.0 Hz
65.9 Hz
60.0 Hz
70.0 Hz
72.0 Hz
75.0 Hz
76.0 Hz
31.5 kHz
31.5 kHz
35.0 kHz
37.8 kHz
37.5 kHz
31.5 kHz
37.8 kHz
48.0 kHz
46.8 kHz
49.7 kHz
48.3 kHz
56.4 kHz
60.1 kHz
68.6 kHz
61.8 kHz
63.9 kHz
74.4 kHz
78.1 kHz
79.9 kHz
81.1 kHz
Advertisement
Table of Contents
