Control Unit - Omnitronic W.A.M.S.-04 User Manual

4.4 Control unit

(11) DC IN SOCKET
Used to plug the power unit in.
(12) REC OUT
To connect your recording unit. The REC OUT-level is not influenced by the volume controls.
(13) AC INPUT SOCKET
Used to plug the power cord in.
(14) FUSEHOLDER
Only replace the fuse when the device is disconnected from mains. Only use fuses of the same rating
and power.
(15) POWER SWITCH
Press the power switch in order to switch the device on.
(16) VOICE PRIORITY-SWITCH
Switch the Voice Priority-function via this switch. The Voice Priority-LED is lit and the microphone is
activated. As soon as you speak into the microphone, the level of all other signal-sources is attenuated
by 14 dB, so that the microphone can clearly be heard.
(17) TAPE/CD-SWITCH
Switch the Cassette-deck or the CD-player via this switch.
(18) CHARGING-LED
(19) POWER-LED
(20) VOICE PRIORITY-LED
(21) TAPE/CD-CONTROL
Adjusts the level of the Cassette-deck or CD-player.
(22) TONE-CONTROL
With the Tone-control, you can adjust the tone.
(23) MIC 1-CONTROL
With the MIC 1 control, you can adjust the volume of the wireless microphone or the cable microphone
MIC 1.
(24) RF-LED
(25) MIC 1- SOCKET
Here, you can connect dynamic microphones via balanced or unbalanced jack plugs.
(26) MIC 2- SOCKET
Here, you can connect dynamic microphones via balanced or unbalanced jack plugs.
(27) MIC 2-CONTROL
With the MIC 2 control, you can adjust the volume of the cable microphone MIC 2.
36/52 13106980_V_1_0.DOC