Table of Contents
Advertisement
Available languages
Available languages
4.7 Control unit
■
Indicator Charge
lights red:
batteries are being charged
flashes red and green: charging almost completed
lights green:
charging completed
■
Master control
Determines the overall level of the active speaker system.
■
Tone controls
Controls for HIs and LOWs.
■
MIC control
To adjust the signal part for the microphone.
■
Line input
Connectors
for
audio
CD/MP3/DVD player, hi-fi system, PC).
■
AC IN jack
Connect the supplied mains cable here.
units
with
line
level
■
Power On/Off
Turns the active speaker system on and off. The switch
lights up during operation. If it starts flashing while
operating with batteries, the batteries are almost
discharged. Then the unit powers down automatically
after a short time.
■
Line output
For passing on the mixed signal, e.g. to a recording unit
or to a further active speaker system. The setting of the
Master control does not affect the Line Out signal.
■
Microphone input
Balanced input combination of XLR and 6.3 mm jack for
connecting a microphone.
■
Speaker connector
(e.g.
6.3 mm jack for connecting a passive speaker system
(min. impedance 8 Ω).
■
Battery compartment
The lead gel batteries are located beneath the battery
compartment cover.
40/56
00031461.DOC, Version 1.1
Advertisement
Table of Contents
