Installing The Parrot Mki9200 - Parrot MKi9200 User Manual

Installing the Parrot MKi9200

Remove the audio system from your vehicles dashboard to access the wiring harness.
•
The cables supplied with the kit feature ISO connectors and two pairs of line-out jacks.
•
The line-out jacks can be used if your audio system features this option (use of an
amplifier). Several set-ups are therefore possible depending on the type of car stereo
and your vehicle.
The mute function is used to cut the sound of your car stereo to enable a phone call.
•
The choice of the mute-in jack depends on your car stereo's configuration.
•
Make sure the cables are not pinched at the end of the installation process.
Car stereo with
ISO connectors
We advise our customers to have the Parrot
MKi9200 fitted by a professional.
1. Connect the male connectors of the hands-free kit to the car
stereo.
2. Join the vehicle's audio and power supply cables to the female
connectors of the Parrot MKi9200.
3. On the installation cable, connect the free yellow wire to one of the
audio system's corresponding mute-in jacks if available (mute in 1,
mute in 2 or mute in 3).
Parrot MKi9200 – User guide 5