Getting Started; Charging The Parrot Minikit; Installing The Parrot Minikit - Parrot MINIKIT+ Quick Start Manual

Getting started

Charging the Parrot MINIKIT+

• The Parrot MINIKIT+ must be charged before being used for
the first time. To do so, plug the charger into your vehicle's
cigar lighter and connect the USB / mini-USB cable to the
charger and to the kit. You can also use the USB / mini-USB
cable to connect the Parrot MINIKIT+ to your computer.
• During charging, the battery indicator light turns red. When
the light goes out, the charge is complete.
• When the battery level is low, a voice prompt is played.

Installing the Parrot MINIKIT+

• Slide the black attach band on your vehicle sun visor. Then use the clip located on the back
of the Parrot MINIKIT+ to install the kit on the attach band.
• Depending on the model of your vehicle, you can also use the clip located on the back of
the Parrot MINIKIT+ to fix it directly to the sun visor of your vehicle.
Turning the Parrot MINIKIT+ on / off
• Hold down the
• If there is no phone connected to the Parrot MINIKIT+ for 5 minutes, the Parrot MINIKIT+
automatically switches to sleep mode. To exit sleep mode, press any button or connect your
phone to the Parrot MINIKIT+.
• If you leave the Parrot MINIKIT+ in your vehicle without turning it off, the Parrot MINIKIT+
will switch to deep sleep mode. Thanks to its vibration detector, the Parrot MINIKIT+ will
automatically exit deep sleep mode when you get back into your vehicle.
DRAFT
button for 2 seconds to turn the Parrot MINIKIT+ on / off.