Using The Parrot Mki9200 For The 1St Time - Parrot MKi9200 User Manual

Using the Parrot MKi9200 for the 1st time

Associating
the control
unit with the
remote control
Navigating
through the
menus
Adjusting the
menu volume
Pairing and
connecting a
phone / PDA via
Bluetooth
If the remote control doesn't seem to be associated to the electronic
box while using the Parrot MKi9200 for the first time, press several
times the button while holding down the
«Pairing remote control» message is said.
This has to be done during a 30 seconds period once the ignition is
turned on.
•
Press the central jog wheel to access the menus.
> The kit says the name of the current menu.
•
Browse through the menus by turning the wheel and confirm
with the button or by pressing the scroll wheel.
•
To exit the menu, press the
To adjust the volume of the Parrot MKi9200, press the jog wheel and
select Settings > Audio > Menu Volume
the desired volume then validate.
The Audio menu also allows you to deactivate the vocal menus.
For further information, refer to the Modifying the audio
settings section.
Prior to using your Parrot MKi9200 with your phone for the very first
time, you must initially pair both devices. The pairing process is only
required once.
1. Make sure the Parrot MKi9200 is set so that it is visible by all
Bluetooth ® devices. To do so, press the jog wheel and select
Settings > Bluetooth >Visibility.
is selected. If it is not the case, select it by pressing the jog
wheel.
The Parrot MKi9200 is visible by default.
2. Press the jog wheel and select
with....
Parrot MKi9200 – User guide
and buttons until the
button or wait a few seconds.
.
Use the jog wheel to adjust
Then, make sure this option
Settings > Bluetooth > Pair
10