Installing The Parrot Mki9200 - Parrot MKi9200 User Manual

Installing the Parrot
MKi9200
Remove the audio system from your vehicles dashboard to access the
•
wiring harness.
The cables supplied with the kit feature ISO connectors and two
•
pairs of line-out jacks. The line-out jacks can be used if your
audio system features this option (use of an amplifier). Several
set-ups are
stereo and your vehicle.
The mute function is used to cut the sound of your car stereo to
•
enable a phone call. The choice of the mute-in jack depends on
your car stereo's configuration.
Make sure
installation process.
Car stereo
with ISO
connectors
We advise our customers to have the Parrot MKi9200 fitted by
a professional.
therefore possible
the cables are
1. Connect the male connectors of the hands-free kit
to the car stereo.
2. Join the vehicle's audio and power supply cables
to the female connectors of the Parrot MKi9200.
3. On the installation cable, connect the free yellow
wire to one of the audio system's corresponding
mute-in jacks if available (mute in 1, mute in 2
or mute in 3).
depending
not pinched at
Parrot MKi9200 – User guide
on the type of
the end of
car
the
5